Sawgrass Option Tray for SG400/SG500 Sublimation Printer USA Domestic Free Shipping

Tired of running out of sublimation paper mid-print? The Sawgrass Option Tray expands the capacity of your Sawgrass SG400/SG500 printer by an additional 250 sheets—up to 500.  This Is Paper Tray Only, Does Not Include Printer or Bypass Tray

To install an add-on paper tray for Sawgrass SG500, you need to12:

1. Press and hold down the [Power] button until the printer turns off, and then unplug the power cord. Disconnect the USB cable or Ethernet cable, if connected.
2. Take the bypass tray out of the box, and any of the packaging tape.
3. Attach the bypass tray while pressing the tabs on each side, and then push it in all the way.
4. Hold down the large gray buttons on the sides of the tray, line it up and insert it to the upper half of your printer’s back side, then release the buttons to click the tray in place.
5. Double check if the back cover has fully clicked onto the back of the printer, then plug it back in and turn it on.